- 100% Charging Acceleration
- Active Current Distribution Technology
- Expanded Compatibility to Support 3.7V and 4.35V batteries
- IMR Battery Restoration
- Automatic Current Selection Based on Battery Capacity
- Automatic Detection of Non-Rechargeable Lithium Batteries
- 100% Charging acceleration means the NEW i2 can charge at up to 1000mA current in one slot.
Active current distribution (ACD) technology allows for the dynamic distribution of the NEW i2's charging power. For example, when two batteries are being charged in the NEW i2 and one of them completes charging, all charging power will automatically go to the other slot and charge the battery at the fastest speed.
Expanded compatibility to support 3.7V and 4.35V batteries allows you to charge a host of batteries with a single charger. Compatible with 1.2V, 3.7V, 4.2V and 4.35V. By simple operation with the V button it is easy to set charging voltage in each slot independently.
IMR battery restoration will restore 0V depleted cells by pressing and holding both the C and V buttons simultaneously.
The NEW i2 can intelligently select the most appropriate charging current based on automatic battery capacity detection.
Safety features include:
- Optimisation for IMR charging by monitoring the voltage stays within safe limits
- Overtime charging protection, limiting to 20 hours
- Made from fire retardant, flame resistant materials
- Automatic Intelligent Temperature Control preventing overheating
To enjoy all advantages mentioned above, please make sure that what you get is a genuine Nitecore charger by using our Validation system. All genuine Nitecore chargers are affixed with a sticker with product ID, a scratch code and QR code on packaging
Li-ion / IMR / LiFePO4:
10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450,
13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123),
16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650,
18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650
Ni-MH (NiCd): AA, AAA, AAAA, C, D
INPUT AC 100~240V 50/60Hz 0.25A(max) 8W DC 9~12V
OUTPUT 4.35V±1%/4.2V±1%/ 3.7V±1%/1.48V±1% / 500mA×2/1000mA ×1
** IMPORTANT PRODUCT SAFETY**
Australian safety certified Nitcore i2 chargers are easily identifiable by the distinct red oval on the factory
packaging. If your packaging DOES NOT have this logo you do not have an Australian safety compliant model and at risk of electrical hazard. All 240v Australian Nitecore products have been tested, certified & approved to Australian / NZ standards and covered by full Australian warranty.
The base of the Nitecore i2 Australian charger label will have C tick with NSW26273 certification code as per photo below.